Select your favourite machine
Tapematic S8+4: the new frontier of sustainable metallization
Cosmopolo Magazine - September 2025
YOUR OWN S8+4
A New Era in 3D Metallization with over 10,000 parts per hour
The S8+4 module is a next-generation in-line sputtering system equipped with two fully independent sputtering cathodes, each capable of depositing distinct metal layers in a single continuous cycle. This dual-process flexibility supports coatings on both conductive materials and substrates requiring enhanced mechanical resistance, making it ideal for strategic industries such as automotive, pharmaceuticals, and premium cosmetics.
With a production capacity exceeding 10,000 parts per hour, the S8+4 is built for large-scale, high-quality manufacturing, offering exceptional process stability, precision, and throughput.
With a production capacity exceeding 10,000 parts per hour, the S8+4 is built for large-scale, high-quality manufacturing, offering exceptional process stability, precision, and throughput.
FEATURES
Engineered to Take You Where No Others Have Gone Before
Designed for modular integration, the S8+4 operates either as a stand-alone unit or as part of a fully automated coating line, seamlessly fitting into diverse production environments. The dual-chamber architecture enables complex decorative effects in a single process. Thanks to its fully automated handling and intelligent control systems, the machine ensures minimal operator intervention, low rejection rates, and maximum output consistency, even at very high speeds.
Technical Specs
Object dimension
Ø 102 x 130 h mm
Cycle time
> 10.000 pcs/hr
Yield
95%
Up-time
85%
Loading
Automated robot sorting system (optional)
Transport
Modular chain conveyor system
Offloading
Automated discharge, multiple boxes (optional)
Clean room environment
Built in class 100 Hepa filter
Target material
Aluminum, Silver, Gold, Stainless Steel, Chrome, Copper, Titanium
Vacuum Chamber
Load lock system to maintain consistent high vacuum
Power
400V 3 phase 50/60 Hz 55 k VA
Air
6 bar 200 N l/min
Water
5 bar 34 lt./min, 16-18°C, pH 6-8, dH 4-8
Aargon
2 bar, 50 sccm, purity 99.999%
European patent granted
EP2500448B1, EP3599030, EP3441232, EP3015176B1
MODULAR DESIGN
A New Automated and Sustainable Approach To 3D Metallization
Built on decades of Tapematic’s expertise in automation, robotics, and surface finishing, the S8+4 establishes a new benchmark in 3D metallization. Featuring ultra-fast cycle times, intelligent configuration memory, and future-ready modularity, the S8+4 empowers manufacturers to meet evolving market demands with speed, precision, and scalability. Optimized vacuum management, smart power distribution, and a resource-efficient design make the S8+4 an indispensable tool for manufacturers committed to sustainable production, particularly in industries where environmental impact is under increasing scrutiny.
TRAY CONCEPT
The Superlative Performance of an Innovative System
The S8+4 module exemplifies cutting-edge innovation while ensuring seamless integration within existing production lines. One of its key strengths lies in the use of the same reliable trays found across the entire Tapematic PST Line range, guaranteeing full compatibility and simplifying workflow transitions. This consistency not only reduces setup times but also enhances operational efficiency by leveraging proven, standardized components. Combined with its advanced technology and high throughput, the S8+4 stands out as a versatile, future-proof solution designed to meet the evolving demands of 3D metallization with unmatched precision and speed.
Why Own a S8+4?
01
Performance
High industrial throughput exceeding 10,000 pieces per hour, ensuring consistent results and meeting the demands of large-scale, high-quality production.
02
In-Line Process
Designed for seamless integration with existing coating lines, allowing for continuous production and a wider variety of finishes in a single workflow.
03
Fully Automatic
Built on Tapematic’s legacy of automation, the S8+4 offers fully automated operation, reducing manual intervention and increasing overall efficiency.
04
Low Consumption
Engineered with energy efficiency in mind, minimizing power usage while maintaining top-level performance.
05
Less Reject
Advanced precision and stable process parameters reduce the rate of defective parts, optimizing production yield.
06
Eco Friendly
Sustainable by design: reduced energy use, lower waste generation, and optimized processes make it a responsible choice for modern production.
07
Quality Control
Consistent parameters and stable process ensure reliable, repeatable results aligned with the highest quality standards.
08
Modular Design
Flexible and scalable, the S8+4 can function as a stand-alone unit or be integrated into larger production setups depending on production needs.
09
Easy to Operate
User-friendly interface and automation simplify operation and reduce training time, empowering operators at all levels.
10
Quality Built
Backed by decades of experience, the S8+4 reflects Tapematic’s commitment to robust engineering, long-term reliability, and industrial-grade durability.
S8+4
Slide show S8+4
YOUR OWN S8+4
FEATURES
MODULAR DESIGN
TRAY CONCEPT
Why Own a S8+4?