| Substrate | |
|---|---|
| Substrate material | PE, HDPE, PC, PET, PS, PP, PA, ABS, SAN, Nylon, Glass, Metal.. |
| Substrate dimension | 125 w x 125 l x 60 h mm |
| Target material | Aluminum, Silver, Gold, Stainless Steel, Chrome, Copper, Titanium.. |
| Base coat Process | |
|---|---|
| Lacquer | UV based laquers, no outgassing solvent |
| Curing | Integrated UV cure lamp |
| Dispersion | Recycling of base coat lacquer solution |
| Temperature | Built-in heater, adjustable from ambient to 100° C (±0,1°C) |
| Top coat Process | |
|---|---|
| Lacquer | UV based laquers, no outgassing solvent |
| Curing | Integrated UV cure lamp |
| Dispersion | Recycling of top coat lacquer solution |
| Temperature | Built-in heater, adjustable from ambient to 100° C (±0,1°C) |
| Main process | |
|---|---|
| Loading | Automated Pick-up from a conveyor |
| Offloading | Automated discharge on a convayor |
| Vacuum chamber | Load lock system to maintain always high vacuum |
| Production | Up to 1800 object per hour |
| Physical | |
|---|---|
| Dimensions | 1200 w x 2600 l x 1800 h mm |
| Open | 1860 mm |
| Weight | 1100 kg |
| Utilities | |
|---|---|
| Power | 400V 3 phase 50/60 Hz 15 k VA |
| Air | 6 bar 200 N l/min |
| Vacuum | - 0.8 bar 10 m3/hr |
| Water | 34 lt./min, 20-22°C, pH 6-8, dH 4-8 |
| Argon | 0.3 - 0.5 bar, 20 sccm, putity 99.999% |
| Environment | |
|---|---|
| Work area | 3 m x 6 m ceiling height minimum 2 m |
| Temperature | 22 - 26 °C |
| Relative Humidity | 55 - 65% non condensing |
| Safety | |
|---|---|
| CE | Complies with all current regulations |
| Exhaust | Non toxic fumes - no exhaust required |